Filter
Top Products
3-7
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-02
Chapter 3 Installing a Network Module
Configuring a Network Module
Configuring a Network Module
C3850-NM-4-1G module
All ports in this module are natively GigabitEthernet and are configured GigabitEthernet1/1/1 though
GigabitEthernet1/1/4. There are only four interfaces which are valid and the other four should not be
used even though they still show up in the CLI.
C3850-NM-4-10G module
All ports in this module default to 10G and should be configured as TenGigabitEthernet1/1/1 through
TenGigabitEthernet1/1/4, even when you are operating them as 1G using SFPs. There are only four
interfaces which are valid and the other four should not be used even though they still show up in the
CLI.
Interface Action
GigabitEthernet1/1/1 Configure this interface
GigabitEthernet1/1/2 Configure this interface
GigabitEthernet1/1/3 Configure this interface
GigabitEthernet1/1/4 Configure this interface
TenGigabitEthernet1/1/1 Disregard
TenGigabitEthernet1/1/2 Disregard
TenGigabitEthernet1/1/3 Disregard
TenGigabitEthernet1/1/4 Disregard
Interface Action
GigabitEthernet1/1/1 Disregard
GigabitEthernet1/1/2 Disregard
GigabitEthernet1/1/3 Disregard
GigabitEthernet1/1/4 Disregard
TenGigabitEthernet1/1/1 Configure this interface
TenGigabitEthernet1/1/2 Configure this interface
TenGigabitEthernet1/1/3 Configure this interface
TenGigabitEthernet1/1/4 Configure this interface