Filter
Top Products
Chapter 1 Product Overview
Switch Features
1-12
Catalyst 4500 Series Switches Installation Guide
78-14409-08
Supervisor engine
support
• Supports the Supervisor Engine II, II+, II+10GE, III, IV, V, V-10GE
• Holds the ASIC-based forwarding engine (data path) and the management
processor and software (control path)
• Features interface monitoring, environmental status, and SNMP and
console/Telnet interface
Note Packets are not forwarded while the module is removed; a system reboot
occurs when a supervisor engine is reinserted.
Switching module
support
• 32-port 10/100-Mbps Fast Ethernet plus 2-port Gigabit Ethernet switching
module (WS-X4232-GB-RJ)
• 32-port 10/100-Mbps Fast Ethernet plus 2-port 1000BASE-X Layer 3
Gigabit Ethernet routing module (WS-X4232-L3)
• 32-port 10/100-Mbps Fast Ethernet switching module with modular uplink
support (WS-X4232-RJ-XX)
–
4-port MT-RJ uplink module (WS-U4504-FX-MT) (optional)
• 2-port Gigabit Ethernet switching module (WS-X4302-GB)
• 24-port 10/100BASE-TX Fast Ethernet switching module
(WS-X4124-RJ45)
• 24-port 100BASE-FX Fast Ethernet switching module (WS-X4124-FX-MT)
• 48-port 100BASE-FX Fast Ethernet switching module (WS-X4148-FX-MT)
• 48-port 100BASE-LX10 Fast Ethernet switching module
(WS-X4148-FE-LX-MT)
• 48-port 10/100-Mbps Fast Ethernet switching module (WS-X4148-RJ)
• 48-port 100BASE-BX10-D Fast Ethernet switching module
(WS-X4148-FE-BD-LC)
• 48-port 10/100-Mbps Fast Ethernet switching module (WS-X4148-RJ21)
• 48-port Cisco pre-standard Power over Ethernet (PoE)
10/100BASE-TX switching module (WS-X4148-RJ45V)
• 48-port 100BASE-X Fast Ethernet switching module (WS-X4248-FE-SFP)
Table 1-3 Features of the Catalyst 4507R Switch (continued)
Feature Description