Filter
Top Products
8
Installation and Configuration Note for the Catalyst 4500 Series Supervisor Engine V
78-15590-02
Supervisor Engine V
Figure 1 Catalyst 4500 Series Supervisor Engine V (WS-X4516)
The supervisor engine includes interfaces for SNMP, console, and Telnet, and provides management
functions, such as environmental status monitoring.
The Supervisor Engine V provides the following features:
• 512-MB Onboard SDRAM memory
• 512-KB NVRAM
• 64-MB onboard Flash memory (in addition to removable Flash memory)
• 96-Gbps switching capacity, 72 million packets-per-second actual forwarding rate
• Support for up to 32,000 MAC addresses for Layer 2 switching (up to 64,000 entries, 16-way
associative lookup table)
• Support for up to 4,000 VLANs
–
802.1Q VLAN tagging on all ports
–
Cisco Inter Switch Link (ISL) tagging on all ports
• Up to 64,000 unicast and multicast forwarding entries, expandable to 256, 000 unicast and multicast
IPV4 forwarding information base (FIB) entries
• Support for all Catalyst 4500 series switching modules (except WS-X4232-L3 and WS-X4019)
• Default Layer 2 forwarding at startup (hardware based)
• Broadcast suppression on a per-port basis
• Multicast suppression on a per-port basis
• Unicast suppression on a per-port basis
• EtherChannel at 10/100/1000 Mbps
• Protocol filtering on a per-port basis
• Dynamic protocol filtering
• Support for IEEE 802.3x flow control
• Hardware-based Layer 3 Switching
• Hardware-based multicast
• Hardware-based access lists
• IP telephony
UP
LIN
K 1 UP
LIN
K
2
A
C
TIV
E
L
IN
E
A
C
TIV
E
LINE
A
CT
IVE
RESET
UTILIZATION
ST
A
TU
S
W
S-X451
5
S
U
PE
RV
ISO
R EN
GINE
IV
1%
100%
CONSOLE
LINK
EJECT
FLASH
10/1
00
MGT
77509
STATUS LED
RESET button
Gigabit uplink
ports
Switch load
indicators
CONSOLE
port
Ethernet
management port
Compact
Flash
port