Filter
Top Products
iDP-3540/41 User’s Manual
CITIZEN 32/48
2) RS-422A type only
No. Function OFF ON Factory
Setting
12 L H OFF
2 2 Printer address L H OFF
32 L H OFF
4 - OFF
5OFF
6 Baud rate setting Refer to the table below ON
7ON
8OFF
bps 110 150 300 600 1200 2400 4800 9600
No.
5 OFF ON OFF ON OFF ON OFF ON
6 OFF OFF ON ON OFF OFF ON ON
7OFFOFFOFFOFFONONONON
8 OFF OFF OFF OFF OFF OFF OFF OFF
11-3. Slide Switch Setting (Serial interface specifications only)
RS-232C or 20mA current loop can selected by changing slide switch SW1 on the control board.
The side labeled “RS” is for RS-232C and the side labeled “CL” is for 20mA current loop.
The switch is set at the factor for RS-232C.
11-4. Dip-Switch Location
Power off and remove the printer cover before setting the Dip-Switches.
Notes: DS2 is mounted for Serial type and RS-422A type only.