Filter
Top Products
Chapter 2 Configuring Advanced Policies 25
4. If you are binding a policy to a Content Switching virtual server, in the
Target field select a load balancing virtual server to which traffic that
matches the policy is sent.
5. Click OK.
Displaying Policy Bindings
You can display policy bindings to verify that they are correct.
To display advanced policy bindings by using the NetScaler command line
At the NetScaler command prompt, type:
show <featureName> policy <policyName>
To display global policy bindings for Integrated Caching, Rewrite, or
Responder by using the configuration utility
1. In the navigation pane, expand the feature that contains the advanced policy
that you want to view, and then click Policy Manager.
2. In the details pane, click the policy. Bound policies have a check mark next
to them.
3. At the bottom of the page, under Details, next to Bound to, view the entity
to which the policy is bound.
To display global policy bindings for DNS or Clientless Access in the
Access Gateway by using the configuration utility
1. In the navigation pane, expand DNS, and then click Policies.
2. In the details pane, click Global Bindings.
To display global policy bindings for Content Switching by using the
configuration utility
1. In the navigation pane, expand Content Switching, and then click Policies.
2. In the details pane, click Show Bindings.
Unbinding an Advanced Policy
If you want to re-assign a policy or delete it, you must first remove its binding.
To unbind an advanced policy globally by using the NetScaler command
line
At the NetScaler command prompt, to unbind an Integrated Caching or Rewrite
policy, type: