Clarion VMA6492 Computer Monitor User Manual


 
2
DESCRIPTION BUTTONS
VMA6492 6.4” TFT LCD Monitor
P
RECAUTIONS
:
This monitor is intended for use in DC 12V, negative ground vehicles.
Do not operate the monitor in ways other than described in this guide. Doing
so may cause damage and void the warranty.
Be careful not to run down the car’s battery while using a multimedia system
with the engine stopped. Doing so may damage the vehicle’s battery or the
multimedia system.
Do not disassemble or modify the monitor. Doing so may damage it and void
the warranty.
Keep moisture away from the set. Water and humidity may damage the inter-
nal circuitry.
Do not let the monitor become overheated. If the temperature inside the vehi-
cle is high or the monitor has been exposed to direct sunlight, lower the moni-
tor’s temperature before use. (The liquid crystal panel operates within a tem-
perature range of 30 – 113 degrees F).
In extremely cold temperatures, the movement of the picture may slow and the
picture may become dark. The monitor will work normally once the tempera-
ture increases to its normal operation range.
Small black or shiny dots may be seen inside the liquid crystal panel. These
are normal when manufacturing liquid crystal products.
D
ESCRIPTION OF
B
UTTON
A
ND
C
ONNECTORS
:
1
Power Indicator LED
2
Remote Sensor
3
Brightness Controls
4
Video IN RCA
5
2-Pin Molex Power Connector
6
IR Serial Remote OUT
7
Input Selector Switch - Video/RGB
8
8-pin RGB input DIN cable