Filter
Top Products
14
Display mode setting
To choose the proper displaying mode for the different video program sources,
please refer to display mode setting as below.
1. Press MENU key until goes to DISPLAY MODE.
2. Press (down key ) or ( up key )to select the displaying mode for :
NORMAL, FULL WIDE, WIDE.
3. WIDE may stretch the image to fill the entire screen, NORMAL displays
the image at its true aspect ratio (4:3), FULL WIDE stretches the image
horizontally to fit the screen for aspect ratio of 16:9.
Notes :
When using a DVD player as the source, make sure that the unit’s output
mode is set to “ FULL WIDE “ or “ 16:9 ”. This ensures that the DVD player
will generate a video signal which can take advantage of the monitor’s
aspect ratio.
When using a source that generates a “ normal “, 4:3 image signal , such
as a videogame or videocassette player, the FULL WIDE mode stretches
the image to fit the screen. Some minor image distortion may be visible.
Video format are automatically changed for PAL or NTSC depends on
video program.
4 : 3
16 : 9