Filter
Top Products
26
Wiring the monitor
Precautions
y Disconnect the negative battery terminal before making any wiring
connections.
y Be particularly careful where you route wires. Keep them away from the
engine, exhaust system, etc. Heat may damage wires.
y If the fuse should blow, make sure all connections are correct and no
wires are damaged before replacing the fuse. Always use fuses that are
the same amperage value as the original. When replacing a fuse, never
let the battery side touch any metal part or any other wire.
Procedure
1. Disconnect the negative(-) lead from the vehicle’s battery.
2. Find a place in the vehicle for the video source(s).
Be sure to disconnect the battery
(-) terminal before starting. This
is to prevent short circuits during
installation.
WARNING !