Filter
Top Products
Disassembly
Removing the Wireless LAN Module 2 - 15
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, remove the battery (page 2 - 5) and the component bay cover (page 2 - 10).
2. The Wireless LAN module will be visible at point on the mainboard.
3. Carefully disconnect cables
- , then remove screw from the module socket.
4. The Wireless LAN module will pop-up.
5. Lift the Wireless LAN module (Figure 11d) up and off the computer.
Figure 11
Wireless LAN
Module Removal
a. Remove the cover.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
d. Lift the WLAN module
out.
Note: Make sure you
reconnect the antenna
cable to “1” + “2”
socket (Figure b).
1
2
3
4
5
5
b.
c.
a.
d.
2
3
1
Note:
Only one model is pic-
tured here, however
the component loca-
tions are the same for
both models.
4
5. WLAN Module.
•1 Screw