Filter
Top Products
Warranty Information:
Please register your printer to activate your warranty. Go to www.CognitiveTPG.com
and click on Warranty Registration.
Helpful Information:
To learn more about CognitiveTPG printers and approved media, please contact
your local reseller or CognitiveTPG:
Website: www.CognitiveTPG.com
Direct: +1.847.383.7900
Toll Free: +800.732.8950
For technical support, please call 607-274-2505.
The EZ-LP ships with the following default settings:
Parameter Default Setting
Programming Language Auto (automatically detects and sets to EcPL or ZcPL)
Speed 5 ips (127 mm/s)
Label Width 432 (4.32 inches or 110 mm)
Label Length Measure label (automatically measures and sets label
length at power up)
Indexing Type Gap
Reference Point 0,0 (upper left corner)
Auto Top of Form On
Enable Label Present On
Advance Label 25 (0.25” or 6.4 mm)
Retract Label 25 (0.25” or 6.4 mm)
Delay Time (Retract Label) 0 seconds
Serial Port Settings
(serial port printers only)
9600 bps, 8 bit data, 1 stop bit, no parity
(DCE conguration - use straight-through cable)
Settings below only apply to printers with Ethernet
Printer IP Address 10.0.0.12
Net Mask 0.0.0.0
Gateway 0.0.0.0
DHCP On
LPD On
RTEL On
RTEL Port Number 9100