Compaq 110 Laptop User Manual


 
5–42 Maintenance and Service Guide
Removal and Replacement Procedures
9. Make sure the PC Card eject button
1
is fully depressed
(Figure 5-26).
10. Lift up the front edge of the system board until the board is at
a 45-degree angle
2
.
11. Pull the system board away from the base enclosure at a
45-degree angle
3
.
Figure 5–26: Removing the System Board
Reverse the above procedure to install the system board.
238850-003.book Page 42 Friday, December 21, 2001 2:53 PM