Filter
Top Products
United States January 3, 2003
Presario 1600 Series
Models: 1683, 1685, 1687, 1688, 1690, 1692, 1693, and 1694
Before You Begin Specifications Parts Catalog
Removal Sequence Troubleshooting Battery Operations
Product Description Pin Assignments
Index
Before You Begin
Electrostatic
Discharge
Service
Considerations
Preparation
for
Disassembly
Service Considerations
Listed below are some of the considerations that you should keep in mind
during the disassembly and assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
● Compaq screwdriver kit (Spare Part No. 161946-001)
● Torx T-9 screwdriver
● 3/16-inch and 5mm nut drivers (for screwlocks and
standoffs)
● Small, standard screwdriver
● Small, Phillips screwdriver
● Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect
screw is used during the reassembly process, it can damage the unit.
Compaq strongly recommends that all screws removed during disassembly be
kept with the part that was removed, then returned to their proper locations.
IMPORTANT:
As each subassembly is removed from the computer, it
should be placed away from the work area to prevent
damage.
privacy and legal statement