Filter
Top Products
CD and DVD Software
Software Guide 1–15
Preparing to Use Easy CD Creator
Ä
CAUTION: To prevent loss of work and damage to an optical drive
medium:
■
Connect the notebook to a reliable external power source
before writing to a medium. Power loss, for example from a
failing battery pack, could corrupt the write process.
■
Before writing to a medium, close all open applications
(including screen savers and antivirus software) except Easy
CD Creator Basic.
■
Do not copy directly from a medium to another medium or from
a network drive to a medium. Instead, copy from a medium or a
network drive to your hard drive, then copy from your hard drive
the medium.
■
Do not type on the notebook keyboard or move the notebook
while the notebook is writing to a medium. The write process is
sensitive to vibration.
Selecting Drive Locations
If you plan to use an optional port replicator during a copy
procedure:
■
Insert the source drive (the drive that is to be copied from)
into the port replicator.
■
Do not copy directly from the source drive to the destination
drive. Instead, copy from the source drive to your hard drive.
Then copy from your hard drive to the destination drive.
If you plan to use a network drive during a copying procedure:
■
Do not copy directly between the network drive and the
optical drive. Instead, copy from the network to your hard
drive, then from your hard drive to the optical drive. Or, copy
from the optical drive to your hard drive, then from your hard
drive to the network drive.