Filter
Top Products
3–14 Software Guide
Security
Entering and Displaying System Information
1. To open Computer Setup, turn on or restart the notebook.
Press
F10
while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏
To change the language, press
F2.
❏
For navigation instructions, press
F1.
2. Access or set your preference(s) by following these
directions:
❏
To view general system information, select
File menu > System Information.
❏
To view or enter identification values for system
components, select Security menu > System IDs.
❏
To enable or disable the reporting of the processor serial
number by the processor to software, select
Advanced menu > Device Options.
❏
To specify how the notebook recognizes multiple,
identical port replicators that are identically equipped,
select Advanced menu > Device Options.
◆
To set the notebook to recognize the port replicators
as a single port replicator, select Disable.
◆
To set the notebook to recognize the port replicators
individually by serial number, select Enable.
3. To confirm the information or your preferences, press
F10.
4. To save your information or preferences, use the arrow keys
to select File > Save Changes and Exit, then follow the
instructions on the screen.
Your preferences are set as you exit Computer Setup and are in
effect when the notebook restarts.