Compaq 410C 486 DX2/50 MHZ 250 MB 4 MB 9.5 Personal Computer User Manual


 
| |-- Handle
|
|-- 3.31 MONITOR SUPPORT COVER
Chapter 3.2 Preparing the Computer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WARNING <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
There is a danger of explosion and risk of personal injury if the battery
is incorrectly replaced or mistreated. Do not attempt to recharge the
battery, disassemble it, or immerse it in water or dispose of it in fire.
Replacement is to be done by Authorized Compaq Service Provider using the
Compaq spare designated for this product.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WARNING <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Ensure that the power cord is disconnected from the electrical outlet and
that the battery pack is removed from the computer before beginning
replacement procedures. Failure to disconnect power could result in
serious injury or damage to the equipment.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Static electricity can damage electronic components. Before beginning
these procedures, make sure you are grounded (discharged of static
electricity) by briefly touching a grounded, unpainted, metal object or
surface.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Before beginning the removal and replacement procedures, follow these
steps to disconnect all power to the computer and remove the diskette or
PC Card, if installed:
1. Save all files and exit all applications.
2. Turn off the computer by pressing the left Ctrl+Alt keys and power
button.
3. Disconnect all external equipment.
4. Disconnect the AC Adapter from the electrical outlet (Figure 3-1).