Filter
Top Products
22. Remove the microphone cable (3) from the display enclosure. The microphone receiver and cable
are included in the Display Cable Kit, spare part number 454919-001.
Reverse this procedure to reassemble and install the display assembly.
Top cover
Description Spare part number
Top cover (includes TouchPad and cable) 454936-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 37).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 38)
b.
Optical drive (see
Optical drive on page 44)
c.
Keyboard (see
Keyboard on page 46)
d.
Switch cover (see
Switch cover on page 49)
e.
Display assembly (see
Display assembly on page 51)
Remove the top cover:
1.
Turn the computer upside down, with the front toward you.
56 Chapter 4 Removal and replacement procedures