Filter
Top Products
2. Select an item from the Main Menu by scrolling down and
highlighting it using the Minus (-) button 2 located on the
monitor front panel. To reverse or back up, press the Plus (+)
button 3.
3. Highlight your choice and press the Menu button 1 again.
4. Adjust the second-level menu displays using the same
procedures as the first level.
The second-level menus for Brightness and Contrast displays an
adjustment screen. Use the Minus button to decrease and the
Plus button to increase the screen brightness and contrast.
5. Access the third level menu by selecting a function and
pressing the Menu button. Adjust the third level menu
displays using the same procedures as the second level.
6. Exit from the on-screen menu by selecting Exit from the
Advanced Menu. If the display is a second or third-level
menu, select Save and Return or Cancel, then select Exit
from the Advanced Menu.
Special OSD Messages
Special OSD messages appear on the monitor screen when
identifying the following monitor conditions:
■
Input Signal Out of Range—Indicates the monitor is unable
to access or fully support the provided input signal.
■
Going to Sleep—Indicates the screen display is entering a
sleep mode.
■
Check Video Cable—Indicates the video cable may not be
plugged into the computer or the computer may not be
turned on.
TFT8030 User’s Guide 21