Filter
Top Products
1. Lay the front bezel down on a soft area to prevent it from
getting scratched, defaced, or broken.
2. Remove the cover plate from the monitor base by placing
your fingers in the opening on the bottom of the base and
pulling upward, then pulling out to remove the cover.
3. Remove the back panel from the monitor by pushing the
bottom tabs upward and pulling out to remove the panel.
4. Connect the video cable to the corresponding connector on
the back panel of the monitor 1 by threading the cable
through the neck on the monitor base to the connector, then
connect the other end of the cable 2 to the appropriate video
connector on the back panel of the computer.
5. Replace the monitor back panel and monitor base cover.
6. Reconnect the power cable and power on the monitor and
computer.
6 TFT8030 User’s Guide