Filter
Top Products
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor
utilizes less than 60 watts of power and the Power LED is green.
The monitor also supports a reduced power state. The reduced
power state will be entered into if the monitor detects the
absence of either the horizontal sync signal and/or the vertical
sync signal. Upon detecting the absence of these signals, the
monitor screen is blanked, the backlight is turned off, and the
Power LED is turned amber. When the monitor is in the reduced
power state, the monitor will utilize less than 5 watts of power.
There is a brief warm up period before the monitor will return to
its normal operating mode.
Refer to your computer manual for instructions on setting energy
saver features (sometimes called power management features).
The above energy saver feature only works when connected to
computers that have energy saver features.
By selecting settings in the monitor’s Energy Saver utility, you
can also program the monitor to enter into the reduced power
state at a predetermined time. When the monitor’s Energy Saver
utility causes the monitor to enter the reduced power state, the
Power LED blinks amber.
Care and Maintenance
This section explains how to care for and maintain your Compaq
monitor during normal everyday use.
Protecting the Monitor
To protect your monitor from overheating and other types of
damage, follow these suggestions:
TFT8030 User’s Guide 27