Filter
Top Products
25
DIGITAL Server Cluster Kits for Windows NT Configuration Guide
-
8. Click the Severity tab and select a severity.
9. Click the Polling tab and set polling parameters.
10. Click the Actions tab and set actions you want to initiate when ServerWORKS receives the trap from
the server management agent. You can:
• Send an email notice.
• Send a paging message.
• Execute a program or script. For example, you can write a script the will run backup on a server
if the server continues to run after a transition of resource. Refer to the cluster manufacturer’s
software documentation for information about scripts for the cluster.
Note: Refer to the DIGITAL ServerWORKS Overview and Installation Guide for details about setting
up notification actions.
11. Choose OK.
Monitoring for Transitions
Use the Alarm Viewer to watch for transition activity on a cluster. From the ServerWORKS Manager
Console, click on the Alarm Viewer status button for the severity that you chose for the Not current
controller and current controller alarm. If a server resource has transitioned from one server to another,
the alarm appears in the Alarm Viewer. Double-click on the alarm to see the details.
DIGITAL Server Cluster Kits
DIGITAL Server Cluster Kit Overview
The DIGITAL Server Cluster Kits are designed to simplify the ordering and building of a NT cluster
using either DCNT or MSCS. DIGITAL Server Cluster Kits contain all the necessary base components,
including:
• Storage array (both RAID and JBOD versions are available)
• SCSI bus hardware (host adapters, controllers/signal converters, cables and termination)
Note: The NTSBU only supports the 2944UW on MSCS. However, we do support the KZPSA with
DCNT. StorageWorks supports the KZ board with MSCS. You'll see a few of their configurations
on Microsoft's HCL.
• RAID controller (where applicable)
• Private network hardware (network adapters and cable)
• RAID Management software and firmware
• ServerWORKS Manager software
• Cluster Kit documentation
• Cluster Quick Start
The DIGITAL Server Cluster Kits do not include:
• Servers