Filter
Top Products
63
DIGITAL Server Cluster Kits for Windows NT Configuration Guide
-
& Refer to your Microsoft Cluster Server Administrator’s Guide for specific procedures.
Step 16b Install DIGITAL Clusters for Windows NT
§ Use the Cluster Checkout Utility on the Quick Launch CD to verify the connections in your cluster.
§ Turn off the power for the RAID Array, and boot both servers.
§ On Host A, install DIGITAL Clusters for Windows NT. Leave Host A up and running. Do not reboot
the server at this time.
§ On Host B, install DIGITAL Clusters for Windows NT.
§ Turn on power for the RAID Array.
§ Reboot the servers one at a time.
§ Run the DIGITAL Cluster Administrator on both servers to verify the cluster installation.
§ Use the DIGITAL Cluster Administrator to set up your shared disks in failover groups.
§ Install DIGITAL Clusters for Windows NT client software on each client as needed.
& Refer to your DIGITAL Clusters for Windows NT Installation and Configuration Guide. For
information on the Cluster Administrator, see your DIGITAL Clusters for Windows NT Administrator’s
Guide for specific procedures.
Pointers for More Information
For the latest information on DIGITAL Server Cluster Kits, go to:
http://akin40.mro.dec.com/DSClusterKits.htm
For the latest information on DCNT, go to:
http://www.windows.digital.com/clusters
For the official Microsoft Hardware Compatibility List, go to:
http://www.microsoft.com/hwtest
For the latest information on the status of our Microsoft Cluster Server qualification and certification
efforts, go to:
http://akin40.mro.dec.com/clusters/DSClusterKits.htm
A Special Thanks
Thanks to all who contributed to this guide. A special thanks goes to Barbara Landino for her cluster-
specific information on ServerWORKS Manager.