Filter
Top Products
42
DIGITAL Server Cluster Kits for Windows NT Configuration Guide
Ready-to-Go Cluster Components
Although there are several Ready-to-Go Cluster configurations available, the following example lists the
components of the Ready-to-Go Cluster using the 7305.
The DIGITAL Server 7305HA is a H9A10 white cabinet 1.70m high (34U) dual AC-In Power
Distribution Unit containing:
• Two 7305R DIGITAL Servers each with:
− One 64-bit Alpha EV5.6 533Mhz with 4MB cache
− Integrated S3 Trio SVGA graphic controller with 1MB VRAM
− One CDROM drive
− One 1.44MB Diskette drive
− One 4.3GB UltraWide SCSI disk
− One 100Mb/s Ethernet Adapter for Cluster communication
− One 100Mb/s Ethernet Adapter for LAN Network Connection
− One two-channel UltraWide SCSI Single Ended adapter
− One one-channel UltraWide SCSI Differential adapter
− One 128MB ECC EDO RAM option (4 x 32MB DIMM)
− Two 450W power supply
• One RA7000 RAID Array with:
− One HSZ70 controller with 64MB cache and 24 SBB Slots
− Two AC-In modules
− One Environment Module
− Eight 180W power supplies
− One 4.3GB UltraWide SCSI disk
Components NOT included in the Ready-to-Go Clusters
The following components are not included in the Ready-to-Go Clusters:
• Tape drives
Tapes drives must be ordered separately.
• Servers disk drives
Servers contain only one 4GB drive. Additional drives must be ordered separately.
• RAID Subsystem disk drives
RAID Subsystem contains only one 4.3GB drive. Additional drives must be ordered separately.
Note: The drives for servers and RAID subsystems are different.
You can also order Ready-to-Go Clusters with the following options:
• Console Switch
• Additional Shelves
• Additional Raid Shelves