Compaq GS160 Server User Manual


 
Operation 7-5
Table 7–3 Special Characters for SRM Console
Character Function
Return or
Enter
Terminates a command line. No action is taken on a
command until it is terminated. If no characters are
entered and this key is pressed, the console just redisplays
the prompt.
Backslash (\)
Continues a command on the next line. Must be the last
characteronthelinetobecontinued.
Delete Deletes the previous character.
Ctrl/A
Toggles between insert and overstrike modes. The default
is overstrike.
Ctrl/B or
up-arrow
Recalls previous command or commands. The last 16
commands are stored in the recall buffer.
Ctrl/C
Terminates the process that is running. Clears Ctrl/S;
resumes output suspended by Ctrl/O. When entered as part
of a command line, deletes the current line. Ctrl/C has no
effect as part of a binary data stream.
Left-arrow Moves the cursor left one position.
Ctrl/E Moves the cursor to the end of the line.
Ctrl/F or
right-arrow
Moves the cursor right one position.
Ctrl/H Moves the cursor to the beginning of the line.
Backspace Deletes ones character.
Ctrl/J Deletes the previous word.
Ctrl/O
Stops output to the console device for the current command.
Toggles between enable and disable. The output can be
reenabled by other means as well: when the console
prompts for a command, issues an error message, or enters
program mode, or when Ctrl/P is entered.
Continuedonnextpage