Filter
Top Products
8-12 AlphaServer GS80/160/320 User’s Guide
8.5 Entering the SCM
Type an escape sequence to invoke the SCM from the SRM console.
You can enter SCM from a modem, or from a local console device.
From a VGA monitor, you can enter SCM commands from the SRM
console.
• You can enter the SCM from the local console device regardless of the
current operating mode.
• You can enter the SCM from the modem if the SCM is in through mode,
snoop mode, or local mode. In snoop mode the escape sequence is passed to
the system and displayed.
Entering from a Console Device
Invoke the SCM from a console device by typing the following default escape
sequence:
<Esc><Esc>scm
To exit, enter the quit command. This action returns you to whatever you
were doing before you invoked the SCM. In the following example, the quit
command returns you to the system COM1 port.
SCM_E0> quit
Returning to COM1 port
Entering SCM Commands from a VGA Console
From the SRM console, enter:
P00>>> SCM <CLI_command>