Filter
Top Products
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: D-CH3 DEVICE DRIVER INSTALLATION.DOC Last Saved On: 12/8/99 10:52 AM
Chapter 3
Device Driver Installation
Introduction
This chapter contains step-by-step instructions for installing the Windows NT
SCSI Miniport driver. This chapter also contains information on the
Tru64Unix and OpenVMS drivers.
System managers must be familiar with the operating system under which the
PCI-to-Fibre Channel Host Bus Adapter (HBA) is to operate. System
managers must also have access to standard system documentation.
NOTE: This chapter describes the steps for installing the Windows NT device driver and
for accessing fibre channel storage devices. For other configuration changes, see
Chapter 6, “Windows NT Registry Information.”
Windows NT 4.0 System Requirements
Ensure that your system meets these minimum requirements:
■ Installed HBA
■ Windows NT SCSI device driver and registry parameter file from
Diskette 2 of the software kit provided with the HBA
■ Windows NT 4.0 Server with Service Pack 4 or greater