Filter
Top Products
2. If the mass storage device is a diskette drive or CD-ROM drive, remove
the diskette or CD from the drive.
3. Push the MultiBay device release button [1] and remove the device
[2] from the bay (Figure 7-5).
Installing a Hard Drive
Only hard drives that are configured for use as a secondary drive can be
used in MultiBay II of the expansion base. Drives without secondary drive
capability can be used only in MultiBay I of the expansion base. These
drives are labeled appropriately. See Appendix C of this manual for more
details.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Removable drives should only be inserted in or removed from the expansion
base when the computer is turned off. Failure to follow this precaution
can result in damage to the drive and expansion base and cause loss or
corruption of data.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Before a hard drive can be inserted in the expansion base, it must be
placed in a hard drive carrier. To install a hard drive in a carrier and
insert it in the expansion base, complete the following steps: