Filter
Top Products
Germany VDE 1
Italy IMQ 1
Japan JIS 3
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
---------------------------------------------------------------------------
NOTES 1: The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0
mm2 conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency
responsible for evaluation in the country where it will be used.
2: The flexible cord must be Type SJT or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with
a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A 250V) configuration.
3: The appliance coupler, flexible cord, and wall plug must bear a
"T" mark and registration number in accordance with the Japanese
Dentori Law. The flexible cord must be Type VCT or VCTF,
3-conductor, 0.75mm2 conductor size. The wall plug must be a
two-pole grounding type with a Japanese Industrial Standard C8303
(15A, 125V) configuration.
===========================================================================
Appendix B.2 2-Conductor Power Cord Set
The wide-range input feature of your computer permits it to operate from
any line voltage between 100 to 240 volts AC.
The power plug or power cord set (appliance coupler, flexible cord, and
wall plug) you received with your computer meets the requirements for use
in the country where you purchased your computer.
Power cord sets for use in other countries must meet the requirements of
the country where you use the computer. For more information on power cord
set requirements, contact your Compaq authorized dealer.
General Requirements
The requirements listed below are applicable to all countries:
1. The length of the power cord set must be at least 6.00 feet (1.8 m)
and a maximum of 9.75 feet (3.0 m).
2. All power cord sets must be approved by an acceptable accredited agency
responsible for evaluation in the country where the power cord set will
be used.