Filter
Top Products
Speaker assembly
Description Spare part number
Speaker assembly 486865-001
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 41).
5. Remove the following components:
a. Optical drive (see
Optical drive on page 42)
b. Keyboard (see
Keyboard on page 54)
c. Switch cover (see
Switch cover on page 56)
Remove the speaker assembly:
1. Disconnect the speaker cable (1) from the system board.
2. Disconnect the num lock cable (2) from the system board.
3. Remove the two Phillips PM2.5×4.0 screws (1) that secure the speaker assembly to the computer.
58 Chapter 4 Removal and replacement procedures