Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–7
5.4 Hard Drive
1. Prepare the computer for disassembly (refer to Section 5.3).
2. Loosen the two Phillips PM2.5×5.0 captive screws 1 that
secure the hard drive cover to the computer.
3. Lift the rear edge of the hard drive cover 2, and then swing it
up and forward and remove it.
✎
The hard drive cover is included in the Plastics Kit, spare part
number 415691-001.
Removing the Hard Drive Cover
Hard Drive Spare Part Number Information
5400 rpm, 100-GB
5400 rpm, 80-GB
5400 rpm, 60-GB
5400 rpm, 40-GB
409064-001
409063-001
409062-001
409061-001