Filter
Top Products
5–40 Maintenance and Service Guide
Removal and Replacement Procedures
20. If it is necessary to replace the wireless transceivers and
cables, remove the Phillips PM2.0×4.0 screw 1 that secures
each transceiver to the display enclosure.
21. Remove the wireless antenna cables from the clips 2 built
into the display enclosure.
22. Detach the wireless antenna transceivers 3 from the
display enclosure.
23. Remove the wireless antenna cables 4.
Removing the Wireless Antenna Transceivers and Cables
Display Assembly Subcomponents
Spare Part Number Information
Wireless antenna transceivers and cables 431398-001