Filter
Top Products
97
Remote Management
This feature is especially helpful for users who work away from the office
or from home.
The user only requires Internet access to manage the network.
Remote Management
To access the router from the Internet when Remote Management is
enabled, open your Internet browser and enter the access point’s WAN
IP address, followed by a colon (:), and then followed by the HTTP port
number.
For example: If your WAN IP address is 210.90.0.13 and you have set port
1111 for remote management, enter 210.90.0.13:1111
Click Remote Management from
the Device Access Managemen
t
menu.
1
1. Specify the HTTP / HTTPS Por
t
number.
Note: Entering 0 would disable
this feature. 80 is the default
remote HTTP port. 443 is the
default remote HTTPS port.
2. Click Apply.
3. Click Reboot
to reboot the
system to effect the changes.
2