Filter
Top Products
36
How to Setup WPA Enterprise Modes
Follow these steps to setup the router to use WPA Enterprise, WPA2
Enterprise, and WPA Auto Enterprise.
WPA Enterprise
1. Select the Cipher Type to
implement:
• TKIP
• AES
• AUTO
The Cipher Type is set to
AUTO by default
so that the
router can automatically
detect which cipher type
can be supported by the
client.
2. Key in the IP address of the
RADIUS Server in your WLAN.
Note: The RADIUS server MUST
be
in the same subnet as you
r
router.
3. The Authentication Port is
preset as 1812, but anothe
r
port number can be used.
Note: The Authentication Port
MUST
match the corresponding
port of the RADIUS server.
4. Enter the Shared Secret Key,
known only to you and the
RADIUS server.
5. The Accounting Port
is preset
as 1813, but another port
number can be used.
1
6. Click Apply.
7. Click on Reboot to restart
the system, after which you
r
settings will become
effective.