Filter
Top Products
71
Follow these steps to setup PPPoE.
PPPoE Configuration
Select PPP over Ethernet from the Select WAN
Type menu.
At the PPPoE WAN Setup page:
1. Enter your broadband Internet account
parameters in the relevant fields.
2. The Status section displays your
connection settings such as:
IP Address
Network Mask
Gateway IP Address
Primary & Secondary DNS
3. If you are online, clicking Disconnect will
disconnect your connection.
4. Click Apply.
5. Click Reboot System button to restart the
system and allow the WAN type
changes to take effect.
To use Email Notification, please refer to
Chapter 8: Router Setup – Broadband Internet
Through the router – WAN Setup Email
Notification
2
1