Filter
Top Products
6. RAID Controller
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
67
Scheduling Array Synchronization
This section of the Options Window allows a user to schedule when and how often FastTrak100-Lite will
perform synchronization maintenance of a mirrored array.
Disable
checkbox is checked (the default) to turn off automated scheduling of synchronization. When
unchecked, the Scheduling section will be highlighted (see above).
On Errors
section offers four radio button choices for the user to select what procedure they would like
to perform if an Error is detected during a scheduled Synchronization. There are three types of
errors that FastTrak100-Lite detects -- a data mismatch between the primary and secondary drive, a
physical media error on source or target drive, or a total disk failure. The options for handling
Errors are as follows:
Abort:
stops the Synchronization process if an error is encountered.
Fix:
in most cases, FastTrak100-Lite automatically can correct errors. The method of correction
varies depending on the type of error.
Ignore:
FastTrak100-Lite will log the event error and continue the synchronization process.
(Warning: this may result in mismatched drives under RAID 1). Use this setting if you want to
detect the presence of errors, but do not want to fix these errors at the time. The user may then
decide what to do about the error(s) detected.
Interactive:
By checking this option, a selection window will appear each time an error is detected
asking the user whether they want to Abort, Fix, or Ignore the error (see Troubleshooting for more
details).