Filter
Top Products
37
Troubleshooting Guide
Corinex AV200 Powerline Ethernet Adapter
6 Troubleshooting Guide
The Corinex AV200 Powerline Adapter has been designed to be a reliable and
easy-to-use network connection device. Please refer to the list below to aid in
troubleshooting.
The POWER LED is off.
1. Verify the connection of the power cable to the adapter’s power inlet.
2. Make sure the power adapter is properly plugged directly into the electrical
outlet, and that the outlet has power.
3. Try another outlet.
The Powerline Act LED is off.
1. Make sure the adapter is plugged directly into the outlet, rather than into a
surge suppressor or power strip. The current model of the Powerline AV 200
Adapter is not designed to function through a surge suppressor.
The Ethernet LED is off.
1. Make sure the adapter is connected with an Ethernet enabled device with an
RJ-45 cable and both devices are powered.
If the trouble persists, please visit
www.corinex.com and go to the appropriate
section for information on your product. There you will find news, manuals and
software updates, as well as frequently asked questions (FAQ).
To avoid personal injury and damage to the system:
1. The principal method to disconnect the device completely from the electrical
power network (mains) is to unplug the power cord from the mains socket.
2. Never install the unit in wet areas or next to radiators/heaters.
3. Never use the unit outside.
4. Unplug the unit during severe storms.
5. Never open the equipment enclosure.