Filter
Top Products
41
Setup Parameter Values Description
LINE MODE LF=LF, CR=CR
CR=LF+CR
LF=LF+CR
LF&CR=LF+CR
If the printer receives a LF code (LF), it only performs a line feed. If
the printer receives a CR code (CR), it only performs a carriage
return.
If the printer receives a CR code (CR), it performs a carriage return
follow ed by a line feed. If the printer receives a LF code (LF), it
performs a line feed.
If the printer receives a LF code (LF), it performs a line feed
follow ed by a carriage return. If the printer receives a CR code
(CR), it only performs a carriage return.
If the printer receives a LF code (LF) or a CR code (CR), it
performs both a line feed and a carriage return.
WRAP MODE truncate,
autow rap
The data exceeding the line length are truncated (truncate) or
printed on the follow ing line (
autowrap).
SLASHED ZERO no, yes Selects the printing character for zero, w ith a slash (yes) or
w ithout (
no).
PRINT DIRECTION unidir., bidir., sw
control
Selects the printing direction of the print head: unidirectional
(
unidir.), bidirectional (bidir.) or selected via software (sw
control
).
EJECT ON FF no, yes Performs a form feed according to the selected page format (no)
or ejects a cut sheet loaded into the printer (
yes).
RESET WITH EJECT no, yes When the printer receives a reset command, if this item is set to
yes the paper inserted in the printer is ejected. If the item is set to