Setting Up Your CD-ROM Drive 2-2
If you have purchased the drive with an IDE CD-ROM interface card,
get the interface card ready (see Figure 2-2).
If you have an audio card installed in your system, get a CD audio
cable ready (see Figure 2-3).
The rest of this chapter shows you how to:
❑
Install Your CD-ROM Drive
❑
Install the Software
❑
Test Your Installation
Installing Your Drive
To install your CD-ROM drive, you need to do the following:
❑
Insert Your Drive into Your System
❑
Connect Cables to Your Drive’s Rear Panel
❑
Connect Cables to Your Card
Figure 2-2: IDE CD-ROM interface card.
Figure 2-3: CD audio cable.