Filter
Top Products
Setting Up Your CD-ROM Drive 2-8
Connecting Cables to Your Audio Card
To connect the CD audio and data cables to your audio card (which has
an IDE CD-ROM interface):
1. Connect the data cable to your audio card as shown in
Figure 2-10. Make sure you align the colored wire on the cable
to Pin 1 of the IDE CD-ROM Data Connector.
If your audio card has multiple CD-ROM data
connectors, connect the data cable to the IDE CD-ROM
Data Connector.
2. Connect the CD audio cable to your audio card as shown in
Figure 2-11.
Figure 2-10: Connecting data cable to the audio card.
Figure 2-11: Connecting CD audio cable to the audio card.