Filter
Top Products
3D Blaster Annihilator 2 MX 8
Windows Me
1. Turn on your system.
2. Windows Me automatically detects the graphics card.
An Add New Hardware Wizard dialog box appears, informing you that a display adapter has been
detected.
3. Windows will automatically install the drivers for a Standard PCI Graphics Adapter (VGA)
(Microsoft) (6-8-2000).
If you are installing 3D Blaster Annihilator 2 MX as a second or subsequent card to make use of
Windows Me’s multi-monitor capability, you will see an Update Driver Warning message telling
you that the driver selected may not work correctly. You must click the Ye s button to confirm that you
want to use the selected driver. Otherwise, the system will install the wrong driver and will not
recognize the card as a 3D Blaster Annihilator 2 MX card (for details, see “Windows 98/Me Multi-
Monitor Display Problems” on page 15).
4. Click the Next button.
5. Click the Finish button.
6. When prompted to restart your system, click the Yes button.
7. After the system has restarted, proceed to install the applications. Click Start -> Run.
8. Insert the 3D Blaster Annihilator 2 MX CD into your CD-ROM drive.
9. In the Run dialog box, type D:\GRAPHICS\ENGLISH\SETUP.EXE (where D: represents your
CD-ROM drive) and click the OK button.
10. Follow the instructions on the screen to complete the setup.
If you do not install all the applications now, you can install them later.
Windows NT 4.0
(Service Pack 5)
1. Turn on your system.
2. Click Start, click Run.
3. In the Run dialog box, type D:\GRAPHICS\ENGLISH\SETUP.EXE (where D: represents your
CD-ROM drive) and click the OK button.
4. Follow the instructions on the screen to complete the setup.
If you do not install all the applications now, you can install them later.
5. If the Invalid Display Settings dialog box appears after your system has restarted, click the OK button
and change the display settings.
For details, see “To change the display settings in Windows NT 4.0 and Windows 2000” on page 10.