Filter
Top Products
Ethernet OEM Module Crestron eServer™
• Baud rates may be one of the following possible rates: 300, 1200, 1800,
2400, 3600, 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600,
and 115200.
• Parity may be even, odd, none, or zero stick (parity bit always 0). When
specifying the parity use E, O, N, or Z, respectively.
• Data bits may be 7 or 8.
• Stop bits may be 1 or 2.
• Both XON/XOFF handshaking and RTS/CTS handshaking are
supported. XON/XOFF and RTS/CTS handshaking are mutually
exclusive in the eServer. If both are enabled, RTS/CTS is used. If CTS
handshaking is enabled, the CTS line is monitored by the eServer. The
CTS line can also be enabled as a digital input to the control system;
the RTS line can be enabled as a digital output.
• Break of any length can be generated.
• Provides character pacing in units of milliseconds for all of the data
specified. The range of the pacing is from 1 to 31 milliseconds. Pacing
greater than 31 millisecond defaults to the maximum (31 ms).
Due to the built-in SIMPL+ logic engine, the eServer is a very powerful one-port
control system with Ethernet and web server built in. The web server with 2Mb of
flash memory can store custom web pages for control of a connected device.
Physical Description
The eServer is housed in a black enclosure with silk-screened labels on the top panel.
There are eight LEDs on the top panel for indicating the unit’s current status. All
connections are made to either end of the shorter side panels. Refer to the physical
view shown after this paragraph. There are four rubber feet on the base of the unit for
stability and to prevent slippage.
eServer Physical Views
E
T
H
E
R
N
E
T
D
E
V
I
C
E
2 • Ethernet OEM Module: eServer™ Operations Guide - DOC. 8148