Filter
Top Products
CY7C64215
Document 38-08036 Rev. *C Page 21 of 30
AC Electrical Characteristics
AC Chip-Level Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and 0°C <
T
A
< 70°C, or 3.0V to 3.6V and 0°C < T
A
< 70°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and are
for design guidance only.
Figure 6. 24 MHz Period Jitter (IMO) Timing Diagram
Table 18. AC Chip-Level Specifications
Parameter Description Min Typ Max Unit Notes
F
IMO245V
Internal Main Oscillator Frequency for 24 MHz
(5V)
23.04 24 24.96
[7, 8]
MHz Trimmed for 5V operation using
factory trim values.
F
IMO243V
Internal Main Oscillator Frequency for 24 MHz
(3.3V)
22.08 24 25.92
[7,9]
MHz Trimmed for 3.3V operation
using factory trim values.
F
IMOUSB
Internal Main Oscillator Frequency with USB
Frequency locking enabled and USB traffic
present.
23.94 24 24.06
[8]
MHz 0°C < T
A
< 70°C
F
CPU1
CPU Frequency (5V Nominal) 0.93 24 24.96
[7,8]
MHz
F
CPU2
CPU Frequency (3.3V Nominal) 0.93 12 12.96
[8, 9]
MHz
F
BLK5
Digital PSoC Block Frequency (5V Nominal) 0 48 49.92
[7, 8,
10]
MHz Refer to the AC Digital Block
Specifications.
F
BLK3
Digital PSoC Block Frequency (3.3V Nominal) 0 24 25.92
[8, 10]
MHz
F
32K1
Internal Low Speed Oscillator Frequency 15 32 64 kHz
Jitter32k 32 kHz Period Jitter – 100 ns
Step24M 24 MHz Trim Step Size – 50 – kHz
Fout48M 48 MHz Output Frequency 46.08 48.0 49.92
[7, 9]
MHz Trimmed. Utilizing factory trim
values.
Jitter24M1 24 MHz Period Jitter (IMO) Peak-to-Peak – 300 ps
F
MAX
Maximum frequency of signal on row input or
row output.
– – 12.96 MHz
T
RAMP
Supply Ramp Time 0 – – μs
Jitter24M1
F
24M
Notes
7. 4.75V < Vdd < 5.25V.
8. Accuracy derived from Internal Main Oscillator with appropriate trim for Vdd range.
9. 3.0V < Vdd < 3.6V. See Application Note AN2012 “Adjusting PSoC Microcontroller Trims for Dual Voltage-Range Operation” for information on trimming for operation
at 3.3V.
10.See the individual user module data sheets for information on maximum frequencies for user modules.
[+] Feedback [+] Feedback