Filter
Top Products
CONFIGURATION USING CODE SYMBOLS
19
Configuration Field Default Setting
Data Format-Symbology Dependent Parameters
Symbology Specific Format Select All
Header Symbology No headers
Terminator Symbology No terminators
Symbology Character Substitution No character to substitute
Symbology Character Deletion No character to delete
Data Format-Concatenation
Concatenation Disabled
Define Concatenation 2 EAN/UPC codes concatenated
Set First Concatenated Code Length 000 = any length
Set Second Concatenated Code Length 000 = any length
Set Third Concatenated Code Length 000 = any length
Set Fourth Concatenated Code Length 000 = any length
Concatenation with Intercode Delay Disabled
Concatenation Timeout 10 seconds
Concatenation Failure Transmission Tx codes causing failure
Transmission after Timeout No code transmission
Concatenation Result Code ID No code Identifier
Advanced Formatting
Format enable/disable Disabled
Camera Control
Exposure Mode Automatic, based on entire image
Power Save
Illumination Power Max power
Illumination System Power ON
Code Selection
Issue Identical Codes Enabled
EAN/UPC
Selection Enabled
Add-On Disabled
UPCE Expansion Disabled
Code 39
Selection Enabled - no check digit
Code39 Full ASCII Disabled
Code Length Check Disabled
Minimum Length 001
Maximum Length 255
Start/Stop Character Disabled