Filter
Top Products
TECHNICAL FEATURES
5
SOFTWARE FEATURES
READABLE CODE SYMBOLOGIES
• EAN/UPC
(including Add-on 2 and Add-on 5)
• Code 93
• 2/5 Interleaved • Code 128
• Code 39 (Standard and Full ASCII) • EAN 128
• Codabar • Pharmacode
Other symbologies available on request
Code Selection up to six codes during one reading phase
Decoding Safety can enable multiple good reads of same code
Headers and Terminators up to four headers and four terminators
Operating Modes On Line, Automatic, Serial On Line, Test
Configuration Modes
• through menus using WinHost utility
• receiving commands from one of the serial ports
(HOST MODE)
Parameter Storage Non-volatile internal EEPROM
ENVIRONMENTAL FEATURES
Operating temperature (Note 3)
0° to 40 °C (32° to 104 °F)
Storage temperature
-20° to 70 °C (-4° to 158 °F)
Humidity max. 90% non condensing
Vibration resistance 14mm @ 2 to 10 Hz
IEC 68-2-6 test FC
1.5mm @ 13 to 55 Hz
2 g @ 70 to 200 Hz
2 hours on each axis
Shock resistance 30g; 11 ms;
IEC 68-2-27 test EA 3 shocks on each axis
Protection class IP65
PHYSICAL FEATURES
Mechanical dimensions 50 x 40 x 28 mm (1.97 x 1.57 x 1.10 in.)
Weight without cable about 160 g. (5.64 oz.)
Note 1:
The features given are typical at a 25 °C ambient temperature (if not otherwise
indicated).
Note 2: Further details given in par. 3.3 and 3.4.
Note 3: If the reader is used in high temperature environments (over 35 °C), use of the
Beam Shutter is advised (see the WinHost configuration program).
23