Datalogic Scanning DX30 Barcode Reader User Manual


 
INSTALLATION
2
2.2 OM-GRYPHON™ INTERFACE CABLE CONNECTIONS
Interface Cable
OM-GRYPHON™ Connectors
The OM-GRYPHON™ incorporates a multi-standard interface which can be connected
to a Host by simply plugging the correct interface cable into the Host connector, placed
on the base of the cradle. In addition the cradle must be connected to an external power
supply.
To disconnect the cable, insert a paper clip or other similar object into the hole
corresponding to the Host connector on the body of the cradle.
Push down on the clip while unplugging the cable.
Disconnecting the OM-GRYPHON™ Cable
erPow
3