Filter
Top Products
Interface Related Features
4-32 QuickScan
®
QS6500/QS6500 BT
Keyboard Wedge/USB Keyboard — cont.
Wedge Quiet Interval
Quiet Interval is the amount of time to look for keyboard activity before
the imager breaks the keyboard connection in order to transmit data to
the host..
NOTE
This feature does not apply to the USB Keyboard
interface.
START
MODE BARCODE
Selectable from 00 (no interval) to 255 in 10 msec
increments. Use hexidecimal (range: 00 to FF hexidec-
imal) to set the interval. To configure this feature, scan
the “START” bar code above to place the unit in Pro-
gramming Mode, then the
Set Wedge Quiet Interval
bar code followed by the digits from the Alphanumeric
table in
Appendix B, Alpha-Numeric Pad represent-
ing your desired length. Accept your selection by scan-
ning the “SET” bar code below and finally, exit
programming mode by scanning the “END” barcode
below
DEFAULT SETTING FOR THIS FEATURE:
01 (10 msec)
Set Wedge
Quiet Interval
SET
END