Filter
Top Products
I-Class 35
4.1.1 Entrance and Exit Prompts
With ‘Ready’ displayed on the LCD, press the Key to enter Menu Mode.
;
Note: While in Menu Mode, the printer will stop processing new DPL (or
bitmapped) data.
MENU MODE Depending upon the configuration of the
printer, the following Entrance and Exit
Prompts may be displayed when accessing or
leaving the Menu System.
ENTER PASSWORD
0 0 0 0
You are attempting to enter Menu Mode.
Security has been enabled and now the
correct user-definable password is required
before accessing the Menu Mode functions.
KEEP HOST CHANGES?
ENTER = YES
You are now entering Menu Mode. Existing
Host commands have affected the
configuration of the printer. Pressing ENTER
will save these changes; otherwise, the
printer will revert to previously saved
settings.
SAVE CHANGES?
ENTER = YES
You are now exiting Menu Mode, but have
made changes to the printer’s settings.
Pressing ENTER will reconfigure your
printer according to these changes;
otherwise, the printer will revert to
previously saved settings.
;
Note: If changes have been made that require a
reset, the printer will automatically invoke that
reset.