Filter
Top Products
I-Class 85
5.4.2 Updating from the Download Mode
Required Update Procedure for Application Version 2.08 or earlier*
Step Displayed Message Operator Action Comment(s)
1
CPPU.QB21
13/19!3022011
Press and hold the
PAUSE and TEST
Keys while turning
‘On’ the printer to
enter the Download
Mode.
The Boot Loader version
is displayed.
;
Note: This information
will vary with the printer
model and Boot Loader
version.
2
VQEBUF!TPGUXBSF
TFOE!TPGUXBSF
Using the DOS
copy command,
copy the filename
to the printer (for
an example see
‘Comment’ Step 1
in Section 5.4.1).
The printer is ready to
accept the new application
version.
;
Note: The parallel port
(LPT1) must be used to
write to the printer.
3
VQEBUF!TPGUXBSF
SFBEJOH!JNBHF
No action required. The printer is receiving
the new image (program).
4
FSBTJOH!GMBTI
TPGUXBSF!JNBHF
No action required. The program has been
received and verified;
now memory is being
cleared of the previous
application.
5
XSJUJOH!GMBTI
TPGUXBSF!JNBHF
No action required. The new program is being
written into Flash
memor y. Upon
completion, the printer
will automatically reset
and start the new
application.
;
Note: If ‘Uncalibrated’
is displayed, the printer
must be calibrated (see
Section 5.0).
*This can also be used as an alternate download method for all other version levels.