Filter
Top Products
20 E-4203/E-4204/E-4304
4.2 Buttons
The three buttons (PAUSE, FEED and CANCEL) perform different
functions based on the printer’s operational mode. The printer operates in
one of the following modes:
Normal: Normal printer functions. See Section 4.3.
Printer Setup: Allows changes to the printer’s operational settings. See
Section 4.4.
Calibration: Allows the ‘calibration’ of the media being used for the
correct sensing of the top of form. See Section 4.6.
4.3 Normal Mode - Button Functions
In ‘Normal’ mode, the printer’s buttons control normal operations such as
pause, feed, and cancel, as well as the test and reset functions by using
button combinations as detailed below.
Normal Mode
F3
F2
F1
Pauses/Un-pauses the printer.
Feeds one label. Also, clears fault conditions.
Cancels the current batch of labels.
Press the Pause button to print the next
batch of labels (if any) in the print buffer.
F2
Press and hold to perform Label Alignment; see Section 4.5.
(Normal power-up)
Button Combinations (push buttons simultaneously)
+
Prints the Test Label, see Section 4.7.2.
+
Performs a warm reset and returns to the Normal Mode
of operation.
+
Produces Database Configuration and Dot Check Labels.