Filter
Top Products
16. Remove the two M2.5 x 5-mm system board screws from the optical drive cage.
17. Remove the two M2.5 x 5-mm system board screws from the chipset heat sink.
18. Remove the two M2.5 x 6-mm screws that secure the left antenna to the hard drive and optical drive cages.
19. Remove the two hex nuts that secure the video connector to the base plastics.
1
M2.5 x 5-mm screws (2)
2
chipset heat sink
3
M2.5 x 5-mm screws (2)
4
optical drive cage
5
M2.5 x 5-mm screws (2)
6
hard drive cage
1
optical drive cage
2
M2.5 x 6-mm screws (2)
3
left antenna
4
hard drive cage