Filter
Top Products
book.book Page 20 Monday, June 25, 2012 11:55 AM
Replacing the System Badge
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 8. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 10. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Slide the tapes on the system badge into the slots on the base-cover assembly.
2 Slide the tabs on the system badge into the slots on the base-cover assembly
and snap the system badge into place.
3 Turn the base-cover assembly over.
4 Adhere the tapes to secure the system badge to the base-cover assembly.
Postrequisites
Follow the instructions from step 2 to step 7 in "Replacing the Base Cover" on page 14.
20 | Replacing the System Badge